How to Identify Your Tap or Mixer Brand (Grohe, Methven, Caroma, Phoenix, Dorf)

Someone has told you the tap needs a new cartridge. Or the mixer is dripping, the handle's gone gritty, and the hardware store wants to know the brand before they'll sell you anything. You've stared at the tap for ten minutes and found nothing that says who made it. Welcome to one of the most common little mysteries in a Melbourne bathroom.
The good news: almost every tap carries a clue somewhere. This guide covers where to look, what the common brands tend to have in common, and what to do once you've worked it out. It's the tap version of our most-read post, how to identify your Caroma toilet model.
Start with the obvious: the visible markings
Most manufacturers put their name or logo somewhere you can see. Check these spots first, using your phone torch and a clean cloth, because soap scum and limescale hide a lot.
The handle or lever. Grohe, Methven and Phoenix often put a small logo on the handle, the cap (the little button hiding the grub screw) or the underside of the lever. Wipe it down and angle the torch across the surface so raised lettering casts a shadow.
The spout. Look on the underside of the spout near the base, and on the flat of the body behind the handle. Some brands stamp the name on the spout collar.
The base or escutcheon. On wall-mounted taps and showers, the round cover plate sometimes carries a stamp. Unscrew it only if you're confident; otherwise leave it for the next step.
The aerator. The small mesh insert at the tip of the spout can often be unscrewed by hand or with a cloth and pliers. Some carry a brand mark or a size code, which is handy when you're matching a replacement.
Under the sink and inside the wall
If the front of the tap is blank, go underneath. Open the vanity, clear out the cleaning products, and look at the tap body, the flexible hoses and the tails (the pipes that connect the tap to the water supply).
Many mixers have a small label or stamp on the body or hose collar, and some have a model code on the mounting nut. Take a clear photo of anything with letters or numbers, even if it looks meaningless. A code such as a series of digits and letters is often exactly what a supplier needs.
If you have the original paperwork, the product box or an old invoice from a bathroom renovation, that's the fastest route. Strata and rental properties often keep a fittings schedule, so ask your property manager or OC secretary before you start taking things apart.

Identify it by the cartridge
When the outside gives nothing away, the cartridge is the next best identifier. It's the cylinder inside the tap body that controls flow and temperature. Replacement cartridges are brand and model specific, so this is the part that matters most for repairs.
Ceramic disc cartridges are the most common in modern mixers. They're smooth, quiet and long-lasting, but a grain of grit or hard-water scale can make them drip.
Compression (washer) taps have a rubber washer that squeezes onto a seat. These are common in older homes across Malvern, Glen Iris and Prahran, and are usually the easiest and cheapest to fix.
Quarter-turn ceramic taps have a short, stiff 90-degree action. They're a ceramic disc design, but the replacement part is different from a mixer cartridge.
Single-lever mixer cartridges vary by diameter (commonly 35 mm or 40 mm), with different stem and base designs. Two cartridges that look nearly identical can be incompatible.
To check the cartridge, isolate the water, undo the handle and the retaining nut, and photograph the cartridge before and after removing it. Measure its diameter and note the number of lugs or notches. We cover a typical symptom of a worn one in our guide to dripping Grohe mixer taps.
Common patterns we see
Rebadged and generic parts. A tap that looks like a premium brand is sometimes an import with a generic cartridge. That can be a good thing, because parts are cheap, or a bad thing, because there is no brand to chase.
Mixed hardware. Over the years a bathroom collects replacements. A Caroma basin tap, a Phoenix shower mixer and a Dorf kitchen tap in the one property is more common than you'd think, especially in rentals.
Discontinued ranges. Some older tapware simply isn't made any more. In that case a plumber can often match the cartridge, or recommend swapping the whole tap if it's cheaper than hunting for a rare part.
Worn-off finishes. Chrome and brushed finishes can wear thin enough that logos disappear. The markings may still be under the sink.
You've identified it: repair, replace or upgrade?
Repair when the tap is in good condition, the brand is common and the fault is a washer, cartridge or O-ring. A plumber's visit for a standard cartridge or washer swap typically sits around $150 to $300 including parts, depending on the tap and access.
Replace when the body is corroded, the finish is flaking, the cartridge is no longer available or the tap has been repaired more than once. A like-for-like mixer swap commonly runs from about $250 to $500 installed, with the price depending on the tap you choose.
Upgrade when you're already planning a refresh, or want a water-efficient WELS-rated tap to cut usage. Higher-end tapware costs more, but the labour is similar. If you're upgrading in an investment property, our rental brand and maintenance guide covers which makes tend to be cost-effective to maintain.
These are benchmark ranges only. Access, isolation valves, fittings and the tap itself all move the price, and we'll quote before we start.
When to DIY vs when to call us
DIY is reasonable when: the shut-off valves work, the tap has a visible brand, and you only need to replace a washer or a clearly identified cartridge. Turn the water off, plug the basin so small parts can't disappear, and photograph each step.
Call us when:
The isolation valve won't close, or turns but doesn't stop the flow. Forcing it can turn a drip into a flood.
The handle or cartridge is seized with scale. Hard pulling cracks tap bodies and basins.
You can't identify the tap or cartridge. Guessing and ordering parts online is how people end up with three wrong cartridges and the same drip.
The tap is in an apartment. A burst or leak into the unit below becomes an insurance conversation fast. See our apartment plumbing FAQ for what to watch.
You see wet cupboards, mould or staining around the base. That points to a leak behind the tap, not just a worn part.
What happens when you book us
1. You book online in a couple of minutes and tell us the suburb, the tap location and what it's doing.
2. Send a photo if you can. Even a blurry shot of the tap and the cartridge area helps us bring the right parts.
3. We confirm a time window and arrive with common cartridges, washers and fittings.
4. We identify the tap, explain the options in plain English and quote the repair or replacement before we start.
5. We fix it, test it for leaks and tidy up. You get a clear invoice note with what was done and the parts used.
What we don't do
We're a residential maintenance plumber. That means maintenance and repair plumbing, gas appliance servicing, roof and gutter repairs and drain clearing. We don't do hydronic heating, air conditioning or new-build construction plumbing, and we'd rather tell you that upfront than waste your time.
Servicing the south-east and surrounds
We look after homes, apartments and owners corporations across South Yarra, Toorak, Prahran, Windsor, Armadale, St Kilda East, Malvern, Glen Iris, Mont Albert, McKinnon, Black Rock, Chadstone, Moorabbin, Balwyn and Docklands.



